Boat cleaner

Boat cleaner

MF-231 - Technical data sheet

Specially designed to clean dirty and hard to reach boat surfaces made of fibreglass or metal (steel, aluminum, magnesium, etc.) Ideal for cleaning surfaces under the waterline, like the hull or the rudder.

Easily dissolves seaweed, grease, petroleum residue, dust, rust, tarnishing and corrosive pollutants, and leaves treated surfaces sparkling clean.

Uses

• Hulls
• Keels
• Rudders
• Stabilizers
• Walls

Advantages

• Fast, efficient cleaner that saves time and money
• Leaves treated surfaces clean and shinny

Instructions

• Dilute 1 part MF-231 with 1 part water
• Apply to surfaces about 1 square meter at a time
• Let stand 1 minute while brushing lighty
• Rinse generously with cold water
• To neutralize MF-231, a baking soda solution (Cow Brand, Arm & Hammer) is recommended, then rinse with water
• Useful tip : Pour into a plastic paint tray and apply from the bottom up with a paint roller

Warning

• Only clean one small surface at a time and do not let the product dry
• After 1 minute, rinse generously
• Always perform a compatibility test on a hidden surface before using
• Keep from freezing
• Keep out of reach of children
• Do not spray on plastic or chrome, including any delicate surface
• Use in a well ventilated area
• Wearing impervious protective clothing and/or rubber apron, gloves and goggles is recommended
• If contact with eyes or skin flush with cold running water for at least 15 minutes
• Seek immediate medical attention