Coil cleaner for cooling and heating systems
Coil cleaner for cooling and heating systems
MF-454 - Technical data sheet
Coil and condenser cleaner, for cooling and heating systems, electronic filters and pre-filters.
Eliminates dirt deposits, frying grease, pollution, cigarette smoke, oil accumulations at the bottom of air-conditioning devices.
Alkaline product.
N.B. : MF-229 PRO-MIC : is a fast and efficient cleaner for heat exchanger plates.
Uses
- Evaporators
- Cooling and heating systems
- Air exchangers
- Electronic filters
- Coils
- Condensers
- Pre-filters
- Rooftop units
- Fin coils
Advantages
- Fast, efficient cleaner that saves time and money
Instructions
- Spray MF-454 on surfaces and wait 2 to 5 minutes
- Rinse generously with water
- Repeat if necessary
- Dilute 1 part MF454 with 5 parts water
Electronic filters :
- Soak 10 seconds; pre-filters : soak 5 seconds
- Rinse generously with water
- Repeat if necessary
Heavy-duty cleaning :
Average cleaning :
- Dilute 1 part MF-454 with 1 part water
Regular cleaning :
- Dilute 1 part MF-454 with 3 parts water or more
Warning
- Always perform a compatibility test on a hidden surface before using
- Keep from freezing
- Keep out of reach of children
- Use in a well ventilated area
- Wearing impervious protective clothing and/or rubber apron, gloves and goggles is recommended
- If contact with eyes or skin flush with cold running water for at least 30 minutes
- Seek immediate medical attention