Coil cleaner
Coil cleaner for cooling and heating systems
MF-454 - Technical data sheet
Coil and condenser cleaner, for cooling and heating systems, electronic filters and pre-filters.
Eliminates dirt deposits, frying grease, pollution, cigarette smoke, oil accumulations at the bottom of air-conditioning devices.
Alkaline product.
N.B. : MF-229 PRO-MIC : is a fast and efficient cleaner for heat exchanger plates.
Uses
- Evaporators
- Cooling and heating systems
- Air exchangers
- Electronic filters
- Coils
- Condensers
- Pre-filters
- Rooftop units
- Fin coils
Advantages
- Fast, efficient cleaner that saves time and money
Instructions
- Spray MF-454 on surfaces and wait 2 to 5 minutes
- Rinse generously with water
- Repeat if necessary
- Dilute 1 part MF454 with 5 parts water
Electronic filters :
- Soak 10 seconds; pre-filters : soak 5 seconds
- Rinse generously with water
- Repeat if necessary
Heavy-duty cleaning :
- Use MF-454 concentrated
Average cleaning :
- Dilute 1 part MF-454 with 1 part water
Regular cleaning :
- Dilute 1 part MF-454 with 3 parts water or more
Warning
- Always perform a compatibility test on a hidden surface before using
- Keep from freezing
- Keep out of reach of children
- Use in a well ventilated area
- Wearing impervious protective clothing and/or rubber apron, gloves and goggles is recommended
- If contact with eyes or skin flush with cold running water for at least 30 minutes
- Seek immediate medical attention
The information contained in this chart has been verified from reliable sources. However, the Laboratoire Chi-Mic & Biologique du Québec Ltée does not give any guarantee, express or implicit, and does not ensure any responsibility concerning the product described above.
The product must be stored, used and be applied in accordance with local, provincial and federal laws.
Material safety data sheet available upon request